Alltek Dune

To Print this page!

Alltek DUNE is a ready mixed exterior grade material made with natural granular chips, marble, sand, other carefully selected and sieved minerals in an acrylic binding medium.

Alltek DUNE material when spread over the surfacewith a trowel gives a beautiful grained finish in various colours offering natural look to the surface that blends well into the surrounding, giving surface protection year after year in a natural way.

Alltek DUNE material has excellent tolerance to vagaries of weather specially ultraviolet light. Further, DUNE material offer excellent surface adhesion and water resistance.

Alltek DUNE materials are supplied in various natural shades in three different grades to suit customer requirements - COARSE, MEDIUM & FINE.


dune
Dune is supplied in natural colours for direct application over the surface.
 


Technical Data
Shade Natural shades as per shade card.
Material & Grades Ready mixed material in COARSE, MEDIUM & FINE.
Dilution Potable Water
Sp. Gravity 1.7
pH 7.5 to 8.5
Toxicity Non toxic
Shelf life 6 months in unopened container.
Surface drying Vary depending upon the climate, however for touch Dry - one hour @30 degree centigrade. For good Surface drying leave 72 hours.
Material Coverage 2 to 5 sft/kg depending upon the material grade, roughness and undulations of the plastered wall.
Note : Use matching alltek basecoat for priming the surface before applying alltek dune.

Features
Features
  • Readymixed paste for direct application.
  • Water resistent.
  • Easy application with a trowel.
  • Long durability.
Colour Natural colours.
Packing 25kg HDPE sack.
Surface Preparation
  • Remove loose sand particles / nibs / fins / oil & grease from the surface.
  • Fill the surface cavities if any and level the surface.
Material Mixing Add potable water if required for dilution.
Application
  • Apply the material on dry wall with a trowel over alltek basecoat finish.
  • Remove excess material & level the surface.
  • Allow the surface to dry well.