Alltek Flex & Flexfine

To Print this page!

Alltek flexible jointing system is specially developed to create seamless joints over panel boards. The joints created with flexible jointing materials alltek flex & flexfine along with premium grade surface finishing materials like alltek deco bisona results in very clean even seamless surface.

Alltek flex is a readymixed flexible jointing material for application over joints between panels like bison panel, plywood boards etc.

Alltek flex gives a relatively coarse surface over which alltek flex fine material is applied to give the surface a smooth finish. After filling the joint deco beach made with specially selected and sieved quartz fractions, sand and other very fine fillers in a acrylic binding medium can be applied.

Alltek deco beach/deco bisona being exterior grade can very well withstand rain and sunlight to protect underlying surface.


Technical Data
Colour White
Dilution Potable Water
pH 7.5 to 8.5
Toxicity Non-toxic
Shelf life 6 months in unopened can

Features
Features
  • Good surface adhesion.
  • Long durability.
Colour White
Packing 20/5/1 kg bag.
Surface preparation
  • Remove loose sand particles / nibs / fins / oil & grease from the surface.
Material Dilution Apply the material as supplied. When required add little water for dilution.
Application
  • Clean the surface.
  • Apply primer coat and allow drying.
  • Dilute material with water as required for spraying.
  • Spray the material with alltek hand gun over the primed surface in a uniform manner.
  • Allow the surface to dry well.